Seven maintenance tips for office furniture?

Seven maintenance tips for modern office furniture?

(1) Furniture rust removal. Chrome furniture rust, do not use sandpaper grinding. Small plating parts can be put into the basin containing engine oil and soaked for 8 to 10 hours, then wiped with cloth. If the large plated furniture is rusty, you can use a brush or cotton yarn dipped in engine oil to apply it to the rusty place. After a while, wipe it with cloth to remove the rust.

(2) Remove water marks. If the water drops on the office furniture are not dried properly, it will leave traces of water stains. In this regard, you can use a wet cloth to cover the marks, and then use an electric iron to carefully press the wet cloth for several times. The water in the marks will evaporate in case of heat, and the water marks can be eliminated.

(3) Repair dents. Some furniture because of the softer wood, after the collision will leave a dent. At this time, you can first use a wet towel on the concave part, and then use an iron to heat and press, you can restore the original state. If the dent is deep, fill should be added.

(4) Office furniture maintenance skills surface bulge. After blistering occurs on the decorative veneer, first use a sharp blade to cut along the wood grain direction in the middle of the blister, then use a syringe to inject the glue into the seam, quietly press the finger on the upper part of the blister, wipe the overflow glue with a wet cloth, and then press a weight with a smooth bottom and larger than the blister area on it. In order to prevent a small amount of glue from overflowing and damaging the surface around the bubble after pressure, the plastic film separation can be covered on the bubble, so that the decorative veneer is smooth.

(5) Remove old paint. If you want to remove the paint of furniture, you can apply the invalid developer on the paint surface of furniture to remove the old paint. After washing and drying, then use fine sandpaper to polish smooth, you can brush paint from the beginning.

Office furniture

(6) Touch up the paint. Office furniture maintenance tips: if the paint surface is damaged by baking, you can wrap a layer of fine grain hard cloth on the toothpick, quietly wipe the traces, and then apply a layer of thin wax to remove the scorch marks. If the furniture lacquer is scratchable, use crayons or pigments with furniture color to cover the exposed background of the furniture, then smear it with a clear nail polish. If wax oil drops on furniture paint surface, do not use sharp blade or nail to scrape. When the daylight is excellent, use plastic sheet, hold hands tightly, tilt forward, scrape wax oil away from the front of the body, and then wipe it with fine cloth.

(7) Correcting cracks. If solid wood furniture cracks due to thermal expansion and cold contraction, the following remedial measures can be adopted. Burn the old cotton cloth or broken sack to ashes, then mix it with tung oil to form a paste, inlay it into the cracks of the wood, and then dry it in the shade to make it smooth and firm. Maybe, tear the newspaper to pieces. Add some alum and water, cook it into a thick paste, cool it and apply it to the cracks in the wood. It's very strong after drying.

This article is from Guangzhou jiante Office Furniture Co., Ltd., please indicate the source of reprint!

For more information about high-end steel cabinet, please consult: jjtgy.com, 24-hour hotline: 13112200605 / 13763327456!