Function and introduction of medical cabinet

The intelligent stainless steel medical cabinet is a special storage device for AED defibrillator. The cabinet is made of metal and equipped with buzzer. Intelligent medical cabinet is generally used in subway, shopping malls and other crowded public areas. Once the door is opened in case of emergency, the alarm can be triggered and it can be used quickly.

Through the transparent window of the storage box, the self checking status of AED in the medical disinfection cabinet and the use status of the whole machine can be clearly observed. There are two types of intelligent medical cabinet, including one machine (including base) and wall hanging machine. The AED size of the device is 28cm in length, 22cm in width and 14cm in thickness. Cabinet size can be customized.

Function introduction

Sound and light alarm function:

After the cabinet receives the event message, the LED screen plays the time address information subtitle, and starts the acousto-optic alarm at the same time. After closing the door, the acousto-optic alarm ends. If no one opens the door to pick up the equipment, the acousto-optic alarm will automatically close when the alarm starts for 4 minutes.

Information upload function:

The door opening information and positioning information are uploaded to the background in real time. The controller is used to detect the door opening status online in real time. When the status changes, the status information and cabinet position information (such as cabinet information associated with mobile phone card number) are uploaded to the background server in real time through the communication module. The door opening information is only 2 seconds. The controller can detect this information and start uploading.

Information display function:

Dot matrix LCD screen is used to display background transmission of two-dimensional code, address and other information. The background information is received and transmitted to the controller in real time through the communication module, and the controller is displayed on the LCD screen through processing; At the same time, the controller also controls the sound and light alarm.

Reset function:

After the sound and light alarm is started, the button switch is used to trigger the controller. After receiving the trigger signal, the controller controls to turn off the sound and light alarm. In this process, the LCD display is not affected.

Long endurance:

Large capacity batteries are used, and it is preliminarily estimated that the cabinet can be used for at least half a year in the case of occasional use. When the battery power is lower than a certain threshold, the warning signal of low battery power and battery power information are uploaded to the background server through the communication module.

Video forensics function:

The weighing sensor is used to detect whether the medical device is in place in real time. When the controller detects that the weight of the weighing sensor changes, it starts the camera to take photos, and transmits the status information and photos to the background server through the communication module.

Other functions:

The internal layout of medical device disinfection cabinet is reasonable, and space is reserved to facilitate the installation of power adapter, which can be used for subsequent product upgrading. In the case that the mains can be connected, the cabinet can be powered by mains and battery.